PVC Wall Panel Making Machine

Description

The main raw materials of PVC wall panels are PVC (From Wikipedia) powder and calcium powder. It has the advantages of waterproof, fireproof, acid and alkali resistance, and anti-corrosion. Nowdays, let’s take a detailed look at the advantages of PVC wall panels and the components of PVC wall panel making machine.

What are the advantages of PVC wall panels?

1. PVC wall panels have good waterproof performance, will not cause deformation or expansion due to moisture, and have a long service life.

2. PVC wall panels have good fire resistance and will not burn due to high temperatures, ensuring personal safety.

3. PVC wall panels have good acid and alkali resistance and will not be deformed or peeled off due to acid or alkali corrosion. They can be suitable for decoration in various acid and alkali environments.

4. PVC wall panels have good anti-corrosion properties and will not be damaged by mold, insect damage, etc., and have a long service life.

5. PVC wall panels come in a variety of colors and styles, which can meet the different needs of consumers, and also have a smooth and bright surface.

How to install PVC wall panels?

First measure the wall.

First of all, we need to measure, the length of the wall panel that needs to be installed, and then calculate the size and number of the wall panel.

Drill holes.

Secondly, nail the fixed buttons on the aluminum alloy, and then use expansion screws or steel nails to drill the holes for hooking the skirting lines on the wall according to the distance between the holes.

Start installing the top corner wire.

Thirdly, apply special glue at both ends, stick it to the top angle, then pull it away, and then paste it tightly after a few minutes.

If the space is relatively humid, you can combine the two skirting lines. At this time, appropriate expansion joints should be left, especially in the corners, more expansion joints should be left.
Install the wainscoting.

Finally, insert the wall plate into the ski line in order. At the beginning, it should be 1.5 cm above the corner to the groove. Then, install the expansion screws or steel nails at the required position. Please note that screws cannot be naked outside the wall board.

Then apply special glue on the groove of the waistline, wait a few minutes and then insert it into the concave and convex surface. It must be 45 degrees diagonally at the corner.

Install the bumper bars.

Install the anti-collision bar on the aluminum alloy bayonet to ensure that the left and right sealing parts are on both sides of the wall. Cut the length of the PVC wall panel, cover the panel on the aluminum alloy, and the installation is complete.

Check.

At the end of the installation, stick to the corner with special glue. Open it for a while and stick it to it, which can increase the firmness of the wall board.

What is the process flow of PVC wall panel making machine?

PVC powder + other additives → mixer → twin-screw extruder → mold → vacuum shaping platform → haul-off machine → laminating machine/heat transfer machine → cutting machine → unloading table

What are the advantages of PVC wall panel making machine?

1. Frequency control, energy saving and convenient speed adjustment.

2. The total machine power consumption is low, the price is economical, and it is suitable for large-scale investment.