PVC Ceiling Panel Machine

Description

PVC ceiling panels are more popular in modern home decoration, because they are simple and convenient to install and cheap, and are very popular among consumers.

So, what are the advantages of PVC ceiling panels? And what are the components of PVC (Form Wiki articles) ceiling panel machine? Let us introduce it to you in detail.

What is PVC ceiling panel?

PVC ceiling panel is made of polyvinyl chloride resin (PVC for short) as the main raw material, adding a certain amount of anti-aging agents, modifiers and other additives, and then mixing, extruding and cooling.

There are many varieties of PVC ceiling panels, and the appropriate colors and patterns can be selected according to factors such as the installation location, personal hobbies, and environmental coordination.

What are the advantages of PVC ceiling panels?

PVC ceiling panels are made of PVC, and their main advantages are: waterproof, moisture-proof, and moth-proof.

The color and pattern on the surface can be selected according to personal preference, and it is resistant to pollution, easy to clean, and has good sound and heat insulation properties.

In particular, flame-retardant materials are added to the new process so that they can extinguish fire immediately and are safer to use. Compared with metal ceiling panels, they are lighter in weight and easier to install.

How to install PVC ceiling panel?

Stretch the line and install the boom.

First, pop up the elevation lines around the wall and fix the pressure lines with cement nails at both ends of the wall.

Secondly, install the boom according to the design requirements and fix it on the concrete roof.

Finally, make sure the height and firmness of the boom are as required.

Install the keel.

Use cement nails to fix the side keels along the elevation line. After determining the position of the keels, install the main keels and secondary keels, paying attention to the spacing and connection method of the keels.

For smaller bathrooms or kitchens, there is no need to install keels. If the ceiling area is large, keels can be laid in the middle. When laying the keel, leave an outlet for the lighting line.

Install the PVC ceiling panel.

First, cut the PVC ceiling panel into square pieces of appropriate size.

Then, fix the PVC ceiling panel on the keel according to the design requirements. You can use self-tapping screws or special ceiling nails to fix it.

Note that when installing the ceiling panel, the clamp head faces forward and the bayonet faces backward. After pushing it into place, use self-tapping screws to fix it on the main keel. After one piece is installed, push in the second piece and fix it on the main keel with screws, and proceed in sequence.

If the location of the lamp is encountered, the hole for the lamp should be sawed and the installation hole should be left.

There is no need to install screws on the last piece. After cutting the length and width, directly push the ceiling panel into the line first, and then insert the chuck into the bayonet of the previous plate in the opposite direction.

Adjust flatness and trimming.

Use tools such as a hand hammer and screwdriver to adjust the flatness of the ceiling panel to ensure that the entire suspended ceiling area is smooth and beautiful.

For some corners and edge areas, edge finishing is required to ensure the integrity of the entire suspended ceiling area.

During the installation process, you need to pay attention to safety, ensure that the boom has sufficient load-bearing capacity and do anti-rust treatment. At the same time, it is necessary to ensure that the structure of the ceiling frame is solid and reliable.

Where can PVC ceiling panels be used?

PVC ceiling panels are widely used in home decoration, public management places, offices, kitchens, bathrooms, etc.

What are the common specifications of PVC ceiling panels?

Commonly used widths are 200mm, 250mm, 300mm, 600mm, etc. The thickness and length can be customized according to customer needs.

What is the process flow of PVC ceiling panel machine?

(1) Mix PVC powder and other additives.

(2) Feed the mixed raw materials into the twin-screw extruder through the feeding machine.

(3) The extruder heats the raw materials and delivers them to the mold.

(4) The raw materials are shaped by the mold (the width and thickness are determined by the mold).

(5) After cooling and shaping on the shaping platform, pulling and cutting, the finished product is finally produced.

(6) The surface can be coated with a thermal transfer machine using a thermal transfer machine. The pattern and color of the film can be according to the customer’s preference.

What are the main features of PVC ceiling panel?

• The machine adopts variable frequency speed regulation, which saves power and is convenient for speed regulation;
• The extruder temperature is controlled by Omron intelligent controller, and temperature fluctuations are automatically adjusted;
• The total power consumption of the production line is low, the price is economical, and it is suitable for large-scale investment.